A wind turbine is a rotating machine which converts the kinetic energy in wind into mechanical energy. If the mechanical energy is used directly by machinery, such as a pump or grinding stones, the machine is usually called a windmill. If the mechanical energy is then converted to electricity, the machine is called a wind generator, wind turbine, wind power unit (WPU), wind energy converter (WEC), or aerogenerator.

This article discusses electric power generation machinery. Windmill discusses machines used for grain-grinding, water pumping, etc. The article on wind power describes turbine placement, economics and public concerns. The wind energy section of that article describes the distribution of wind energy over time, and how that affects wind-turbine design. See environmental concerns with electricity generation for discussion of environmental problems with wind-energy production.

File:Turbine aalborg.jpg


Main article: History of wind power
File:Wind turbine 1941.jpg

Wind machines were used in Persia as early as 200 B.C. This type of machine was introduced into the Roman Empire by 250 A.D. However, the first practical windmills were built in Sistan, Iran, from the 7th century. These were vertical axle windmills, which had long vertical driveshafts with rectangle shaped blades.[1] Made of six to twelve sails covered in reed matting or cloth material, these windmills were used to grind corn and draw up water, and were used in the gristmilling and sugarcane industries.[2]

By the 14th century, Dutch windmills were in use to drain areas of the Rhine River delta. In Denmark by 1900 there were about 2500 windmills for mechanical loads such as pumps and mills, producing an estimated combined peak power of about 30 MW. The first known electricity generating windmill operated was a battery charging machine installed in 1887 by James Blyth in Scotland, UKTemplate:Fact. The first windmill for electricity production in the United States was built in Cleveland, Ohio by Charles F Brush in 1888, and in 1908 there were 72 wind-driven electric generators from 5 kW to 25 kW. The largest machines were on 24 m (79 ft) towers with four-bladed 23 m (75 ft) diameter rotors. Around the time of World War I, American windmill makers were producing 100,000 farm windmills each year, most for water-pumping.[3] By the 1930s windmills for electricity were common on farms, mostly in the United States where distribution systems had not yet been installed. In this period, high-tensile steel was cheap, and windmills were placed atop prefabricated open steel lattice towers.

A forerunner of modern horizontal-axis wind generators was in service at Yalta, USSR in 1931. This was a 100 kW generator on a 30 m (100 ft) tower, connected to the local 6.3 kV distribution system. It was reported to have an annual capacity factor of 32 per cent, not much different from current wind machines.[4]

The first utility grid-connected wind turbine operated in the UK was built by the John Brown Company in 1954 in the Orkney Islands. It had an 18 meter diameter, three-bladed rotor and a rated output of 100 kW.

Potential turbine powerEdit

Main article: Wind turbine design
File:Wind power coeff.jpg

The amount of power transferred to a wind turbine is directly proportional to the area swept out by the rotor, to the density of the air, and the cube of the wind speed.

The power P in the wind is given by:

P = \begin{matrix}\frac{1}{2}\end{matrix}\alpha\rho\pi r^2 v^3,

where P = power in watts., α = an efficiency factor determined by the design of the turbine, ρ = mass density of air in kilograms per cubic meter, r = radius of the wind turbine in meters, and v = velocity of the air in meters per second.[5]

As the wind turbine extracts energy from the air flow, the air is slowed down which causes it to spread out. Albert Betz, a German physicist, determined in 1919 (see Betz' law) that a wind turbine can extract at most 59% of the energy that would otherwise flow through the turbine's cross section, that is α can never be higher than 0.59 in the above equation. The Betz limit applies regardless of the design of the turbine.

This equation shows the effects of the mass rate of flow of air traveling through the turbine, and the energy of each unit mass of air flow caused by its velocity. As an example, on a cool 15 °C (59 °F) day at sea level, air density is 1.225 kilograms per cubic metre. An 8 m/s (28.8 km/h or 18 mi/h) breeze blowing through a 100 meter diameter rotor would move almost 77,000 kilograms of air per second through the swept area. The total power of the example breeze through a 100 meter diameter rotor would be about 2.5 megawatts. Betz' law states that no more than 1.5 megawatts could be extracted.

Types of wind turbinesEdit

Wind turbines can be separated into two types based by the axis in which the turbine rotates. Turbines that rotate around a horizontal axis are more common. Vertical-axis turbines are less frequently used.

Horizontal axisEdit

File:Scout moor gearbox, rotor shaft and brake assembly.jpg

Horizontal-axis wind turbines (HAWT) have the main rotor shaft and electrical generator at the top of a tower, and must be pointed into the wind. Small turbines are pointed by a simple wind vane, while large turbines generally use a wind sensor coupled with a servo motor. Most have a gearbox, which turns the slow rotation of the blades into a quicker rotation that is more suitable to drive an electrical generator.[6]

Since a tower produces turbulence behind it, the turbine is usually pointed upwind of the tower. Turbine blades are made stiff to prevent the blades from being pushed into the tower by high winds. Additionally, the blades are placed a considerable distance in front of the tower and are sometimes tilted up a small amount.

Downwind machines have been built, despite the problem of turbulence, because they don't need an additional mechanism for keeping them in line with the wind, and because in high winds, the blades can be allowed to bend which reduces their swept area and thus their wind resistance. Since turbulence leads to fatigue failures, and reliability is so important, most HAWTs are upwind machines.

HAWT SubtypesEdit


There are several types of HAWT:

12th-century windmills 

These squat structures, typically (at least) four bladed, usually with wooden shutters or fabric sails, were developed in Europe. These windmills were pointed into the wind manually or via a tail-fan and were typically used to grind grain. In the Netherlands they were also used to pump water from low-lying land, and were instrumental in keeping its polders dry.

In Schiedam, the Netherlands, a traditional style windmill (the Noletmolen) was built in 2005 to generate electricity.[7] The mill is one of the tallest Tower mills in the world, being some Template:Convert tall.

19th-century windmills 

The Eclipse windmill factory was set up around 1866 in Beloit, Wisconsin and soon became successful building mills for pumping water on farms and for filling railroad tanks. Other firms like Star, Dempster, and Aeromotor also entered the market. Hundreds of thousands of these mills were produced before rural electrification and small numbers continue to be made.[3] They typically had many blades, operated at tip speed ratios (defined below) not better than one, and had good starting torque. Some had small direct-current generators used to charge storage batteries, to provide power to lights, or to operate a radio receiver. The American rural electrification connected many farms to centrally-generated power and replaced individual windmills as a primary source of farm power by the 1950s. They were also produced in other countries like South Africa and Australia (where an American design was copied in 1876[8]). Such devices are still used in locations where it is too costly to bring in commercial power.

Modern wind turbines

Turbines used in wind farms for commercial production of electric power are usually three-bladed and pointed into the wind by computer-controlled motors. These have high tip speeds of up to six times the wind speed, high efficiency, and low torque ripple, which contribute to good reliability. The blades are usually colored light gray to blend in with the clouds and range in length from 20 to 40 metres (65 to 130 ft) or more. The tubular steel towers range from 200 to 300 feet (60 to 90 metres) tall. The blades rotate at 10-22 revolutions per minute.[9][10] A gear box is commonly used to step up the speed of the generator, although designs may also use direct drive of an annular generator. Some models operate at constant speed, but more energy can be collected by variable-speed turbines which use a solid-state power converter to interface to the transmission system. All turbines are equipped with shut-down features to avoid damage at high wind speeds.

HAWT advantagesEdit

  • Variable blade pitch, which gives the turbine blades the optimum angle of attack. Allowing the angle of attack to be remotely adjusted gives greater control, so the turbine collects the maximum amount of wind energy for the time of day and season.
  • The tall tower base allows access to stronger wind in sites with wind shear. In some wind shear sites, every ten meters up, the wind speed can increase by 20% and the power output by 34%.

HAWT disadvantagesEdit

File:Turbine Blade Convoy Passing through Edenfield.jpg
  • HAWTs have difficulty operating in near ground, turbulent winds.
  • The tall towers and blades up to 90 meters long are difficult to transport. Transportation can now cost 20% of equipment costs.
  • Tall HAWTs are difficult to install, needing very tall and expensive cranes and skilled operators.
  • Massive tower construction is required to support the heavy blades, gearbox, and generator.
  • Reflection on tall HAWTs may affect side lobs of radar installations creating signal clutter, although filtering can suppress it.
  • Their height makes them obtrusively visible across large areas, disrupting the appearance of the landscape and sometimes creating local opposition.
  • Downwind variants suffer from fatigue and structural failure caused by turbulence.
  • HAWTs require an additional yaw control mechanism to turn the blades toward the wind.

Cyclic stresses and vibrationEdit

Cyclic stresses fatigue the blade, axle and bearing; material failures were a major cause of turbine failure for many years. Because wind velocity often increases at higher altitudes, the backward force and torque on a horizontal-axis wind turbine (HAWT) blade peaks as it turns through the highest point in its circle. The tower hinders the airflow at the lowest point in the circle, which produces a local dip in force and torque. These effects produce a cyclic twist on the main bearings of a HAWT. The combined twist is worst in machines with an even number of blades, where one is straight up when another is straight down. To improve reliability, teetering hubs have been used which allow the main shaft to rock through a few degrees, so that the main bearings do not have to resist the torque peaks.

When the turbine turns to face the wind, the rotating blades act like a gyroscope. As it pivots, gyroscopic precession tries to twist the turbine into a forward or backward somersault. For each blade on a wind generator's turbine, precessive force is at a minimum when the blade is horizontal and at a maximum when the blade is vertical. This cyclic twisting can quickly fatigue and crack the blade roots, hub and axle of the turbines.

File:Hassloch-pfalz westernmill 20060429 387 part.jpg

Vertical axisEdit

Vertical-axis wind turbines (or VAWTs) have the main rotor shaft arranged vertically. Key advantages of this arrangement are that the turbine does not need to be pointed into the wind to be effective. This is an advantage on sites where the wind direction is highly variable. VAWTs can utilize winds from varying directions.

With a vertical axis, the generator and gearbox can be placed near the ground, so the tower doesn't need to support it, and it is more accessible for maintenance. Drawbacks are that some designs produce pulsating torque. Drag may be created when the blade rotates into the wind.

It is difficult to mount vertical-axis turbines on towers, meaning they are often installed nearer to the base on which they rest, such as the ground or a building rooftop. The wind speed is slower at a lower altitude, so less wind energy is available for a given size turbine. Air flow near the ground and other objects can create turbulent flow, which can introduce issues of vibration, including noise and bearing wear which may increase the maintenance or shorten the service life. However, when a turbine is mounted on a rooftop, the building generally redirects wind over the roof and this can double the wind speed at the turbine. If the height of the rooftop mounted turbine tower is approximately 50% of the building height, this is near the optimum for maximum wind energy and minimum wind turbulence.

VAWT subtypesEdit

Darrieus wind turbine 
"Eggbeater" turbines. They have good efficiency, but produce large torque ripple and cyclic stress on the tower, which contributes to poor reliability. Also, they generally require some external power source, or an additional Savonius rotor, to start turning, because the starting torque is very low. The torque ripple is reduced by using three or more blades which results in a higher solidity for the rotor. Solidity is measured by blade area over the rotor area. Newer Darrieus type turbines are not held up by guy-wires but have an external superstructure connected to the top bearing.
A subtype of Darrieus turbine with straight, as opposed to curved, blades. The cycloturbine variety has variable pitch to reduce the torque pulsation and is self-starting [1]. The advantages of variable pitch are: high starting torque; a wide, relatively flat torque curve; a lower blade speed ratio; a higher coefficient of performance; more efficient operation in turbulent winds; and a lower blade speed ratio which lowers blade bending stresses. Straight, V, or curved blades may be used. Recently, this type of turbine has been advanced by former Russian rocket scientists who claim to have increased the efficiency of the VAWT up to 38%. A company, SRC Vertical Ltd.[2], has been formed, and has begun selling the new turbine.
Savonius wind turbine 
These are drag-type devices with two (or more) scoops that are used in anemometers, Flettner vents (commonly seen on bus and van roofs), and in some high-reliability low-efficiency power turbines. They are always self-starting if there are at least three scoops. They sometimes have long helical scoops to give a smooth torque. The Alvin Benesh rotor and the Hamid Rahai rotor improve efficiency with blades shaped to produce significant lift as well as drag.

VAWT advantagesEdit

  • No massive tower structure is needed.
  • As the rotor blades are vertical, no yaw mechanism is needed.
  • A VAWT can be located nearer the ground, making it easier to maintain the moving parts.
  • VAWTs have a higher airfoil pitch angle, giving improved aerodynamics while decreasing drag at low and high pressures.
  • Straight bladed VAWT designs with a square or rectangular cross-section have a larger swept area for a given diameter than the circular swept area of HAWTs.
  • VAWTs have lower wind startup speeds than HAWTs. Typically, they start creating electricity at 6 m.p.h. (10 km/h).
  • VAWTs usually have a lower tip speed ratio and so are less likely to break in high winds.
  • VAWTs may be built at locations where taller structures are prohibited.
  • VAWTs situated close to the ground can take advantage of locations where mesas, hilltops, ridgelines, and passes funnel the wind and increase wind velocity.
  • VAWTs do not need to turn to face the wind if the wind direction changes.
  • VAWT blades are easily seen and avoided by birds.
  • Most VAWTs start easily and do not require energy to begin turning.

VAWT disadvantagesEdit

  • Most VAWTs produce energy at only 50% of the efficiency of HAWTs in large part because of the additional drag that they have as their blades rotate into the wind. Versions that reduce drag produce more energy, especially those that funnel wind into the collector area.
  • VAWTs will rotate faster in stronger winds at higher elevations as they rotate at least as fast as the wind velocity.
  • A VAWT that uses guy-wires to hold it in place puts stress on the bottom bearing as all the weight of the rotor is on the bearing. Guy wires attached to the top bearing increase downward thrust in wind gusts. Solving this problem requires a superstructure to hold a top bearing in place to eliminate the downward thrusts of gust events in guy wired models.
  • While VAWTs' parts are located on the ground, they are also located under the weight of the structure above it, which can make changing out parts nearly impossible without dismantling the structure if not designed properly.
File:Windmills at Lackawanna, New York.jpg


Main article: Wind power

Wind turbines can also be classified by the location in which they are to be used. Onshore, offshore, or even aerial wind turbines have unique design characteristics, which are explained in more detail in section on turbine design and construction.

Turbine design and constructionEdit

Main article: Wind turbine design

Wind turbines are designed to exploit the wind energy that exists at a location. Aerodynamic modeling is used to determine the optimum tower height, control systems, number of blades, and blade shape.

Wind turbines convert wind energy to electricity for distribution. The turbine can be divided into three components. The rotor component, which is approximately 20% of the wind turbine cost, includes the blades for converting wind energy to low speed rotational energy. The generator component, which is approximately 34% of the wind turbine cost, includes the electrical generator, the control electronics, and most likely a gearbox component for converting the low speed incoming rotation to high speed rotation suitable for generating electricity. The structural support component, which is approximately 15% of the wind turbine cost, includes the tower and rotor pointing mechanism.[11]

Low temperatureEdit

Utility-scale wind turbine generators have minimum temperature operating limits which apply in areas that experience temperatures below –20 °C. Wind turbines must be protected from ice accumulation, which can make anemometer readings inaccurate and which can cause high structure loads and damage. Some turbine manufacturers offer low-temperature packages at a few percent extra cost, which include internal heaters, different lubricants, and different alloys for structural elements. If the low-temperature interval is combined with a low-wind condition, the wind turbine will require an external supply of power, equivalent to a few percent of its rated power, for internal heating. For example, the St. Leon, Manitoba project has a total rating of 99 MW and is estimated to need up to 3 MW (around 3% of capacity) of station service power a few days a year for temperatures down to –30 °C. This factor affects the economics of wind turbine operation in cold climates.

Special wind turbinesEdit

Main article: Special wind turbines

One E-66 wind turbine at Windpark Holtriem, Germany, carries an observation deck, open for visitors to see. Another turbine of the same type, with an observation deck, is located in Swaffham, England.

A series of lighter-than-air wind turbines are in development in Canada by Magenn Power. They deliver power to the ground by a tether system.[12]

Wind turbines may also be used in conjunction with a large vertical solar updraft tower to extract the energy due to air heated by the sun. Or as part of wave powered generators where air displaced by waves drives turbines.[13]

Variable pitch wind turbines are another special (yet low-cost) design. Designs such as the Jacobs are said to be inexpensive, highly efficient and usable in DIY-construction.[14]

Small wind turbinesEdit

Main article: Small wind turbine
File:SOMA Wind generator.jpg

Small wind turbines may be as small as a fifty-watt generator for boat or caravan use. Small units often have direct drive generators, direct current output, aeroelastic blades, lifetime bearings and use a vane to point into the wind. Larger, more costly turbines generally have geared power trains, alternating current output, flaps and are actively pointed into the wind. Direct drive generators and aeroelastic blades for large wind turbines are being researched.

Record-holding turbines Edit

The world's largest turbines are manufactured by the Northern German companies Enercon and REpower. The Enercon E-126 delivers up to 6 MW, has an overall height of 198 m (650 ft) and a diameter of 126 meters (413 ft). The Repower 5M delivers up to 5 MW, has an overall height of 183 m (600 ft) and has a diameter of 126 m (413 ft).

The turbine closest to the North Pole is a Nordex N-80 in Havøygavlen near Hammerfest, Norway. The ones closest to the South Pole are two Enercon E-30 in Antarctica, used to power the Australian Research Division's Mawson Station.[15]

Matilda was a wind turbine located on Gotland, Sweden. It produced a total of 61.4 GWh in the 15 years it was active. That is more renewable energy than any other single wind power turbine had ever produced to that date. It was demolished on June 6th, 2008.


Wind turbines have very few impacts on the environment other than aesthetic effects, although VAWT designs are increasingly being designed with innovative artistic aesthetics. Template:Fact

Wind Turbine Syndrome is a clinical phenomenon first coined by Nina Pierpont. According to her research, some people, when living in close proximity to horizontal axis industrial wind turbines, are affected by low-frequency vibrations emanating from the turbine. VAWT do not lend themselves to this effect as they do not rotate faster than wind speed.Template:Fact

Template:See also

See also Edit





Further readingEdit

External linksEdit


This page uses Creative Commons Licensed content from Wikipedia (view authors). Smallwikipedialogo.png

Cite error: <ref> tags exist, but no <references/> tag was found

Ad blocker interference detected!

Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.